Accessories

M J Industries Vibrator drive units are correctly engineered to give stable performance at high speed with minimum maintenance. They come with CE Marking, thus conforming to the stringent European Safety Norms for Machinery Safety, Low Voltage Directive as well as the Electro Magnetic Compatibility.

Highlights : M J Industries uses totally encapsulated type coils with adequate power for respective models. A removable guard / cover is provided for safety for all vibrator drives. All drive units are for FULL WAVE Operation (100 Cycles) and hence the energy consumption of M J Industries vibratory drive units is 40% less than its competitors who offer HALF WAVE Operation. For heavy components and bigger bowls, M J Industries can also provide HALF WAVE Vibrators (Model 400 HD and Model 630).

M J Industries can provide Stands for mounting the Vibratory Feeders. The advantage of standard M J Industries stands are its height adjustment. Standard units have (+/-) 100 mm ht. adjustment while even (+/-) 200 mm height adjustment can also be provided in case of requirement. M J Industries stands also come with leveling screws with optional provision for grommeting to the ground. Stands can be of the following types

Once the component comes out of the bowl feeder, it needs to be taken to the next station, for this either a gravity chute or a linear track has to be used.

Gravity Chutes : Components can move with gravity if the correct inclination is provided. M J Industries can help you decide on the correct inclination for your component.

Linear Chute : In case you require the chute to be horizontal for feeding to the next operation, then a linear chute is required. A linear chute is mounted on a linear vibrator and can be anywhere from 300 mm to 1500 mm in length or even more.

Silos : M J Industries offers Silo type Hoppers for providing higher capacities. Usually, the number of components which can be loaded in a Vibratory Bowl Feeder is constrained by the Weight and the Volume of the components. In order to increase the loading capacity, usually Auxiliary Hoppers are provided. The disadvantage of Auxiliary Hoppers is the extra space which they occupy and plus the extra cost and electrical consumption and wiring required for the same. As against this, Silos offer the advantage of increased loading capacity and they do not require any Electrical Supply. The increase in height is also nominal. The overall Table size also does not increase to that extent. Though the Silo has a lot of advantages, the only disadvantage is that it can only be used for certain components like Needles, Rollers etc. However, it cannot be used for components like screws, hooks etc.