Vibrator Controllers Regulators

These have a sensor attached to the springs of the vibrator which provides feedback of the load in the vibratory feeder to the controller. The micro-chip in the controller takes this feedback and adjusts itself accordingly. This is of tremendous value in case of changing load and heavy components.

Double Speedy In all the above Models, DOUBLE SPEEDY is available i.e. two Potentiometers are given whereby one is used for course adjustment and one for fine adjustment. These are of tremendous use in case of weighting and batching systems.The controllers are specially designed for controlling the amplitude of vibration in industrial electromagnetic vibrators.The system is based on a integrated circuit which guarantees perfect synchronisation of the triac firing pulse with the waveform of the working voltage under all conditions.The controllers also include a suitable circuit for soft start with provision for choosing the ramp time (0.2-2s) and for temperature compensation of the phase angle.Appropriately over specified power stages are provided to handle any overloads without interruption, whether operating at 50Hz or 60Hz.Highly linear adjustment, as well as provision for setting the maximum and minimum vibration limits complete the list of main features embodied in the series E controllers.Vibration regulation is through an external potentiometers and on/off type control with external low power contact for weighing and batching system.

This is an importance feature in M J Industries vibrator controllers. In case the current drawn exceeds set limit, the power supply to the vibrator is switched off automatically, thus saving the vibrator coils. Most Circuits are CE Marked and can either be given with Box or even only Circuits can be provided to Machine Builders for integration in their own Control Pane.

MJ Industry produces feeder controllers that can control any feeder drive unit and most other manufacturers’ versions. The vibrator controller regulators are available in two voltages: 120 volts and 240 volts. They are intended for basic vibratory feeder operation while also being capable of a sophisticated operation. We are leading producers and suppliers of a wide selection of Vibrator controllers that have been created by set standards. It is available to client’s at the most competitive and market-leading prices. We hired qualified professionals to ensure that we offer items to our consumers that check all of the boxes on our quality check.

The Vibrators controllers are specifically intended for regulating the vibration amplitude in industrial electromagnetic vibrators. The system is built around an integrated circuit that ensures a flaw synchronization icon of Triac firing pulse with the operating voltage waveform under all situations. The Vibrator controller’s regulator Manufacturer additionally incorporates a soft start circuit with options for ramp time (0.2-2s) and temperature correction of the phase angle. Over specified power, stages are supplied to handle any overloads without interruption, regardless of whether the frequency is 50Hz or 60Hz. The series E controllers’ key characteristics include very linear adjustment as well as the ability to specify maximum and lowest vibration limits. Vibration is controlled by external potentiometers, and the on/off switch is also external. MJ industrial control system is a producer, supplier, and exporter of electromagnetic vibrator feeder controller regulators, in Ahmedabad. For bowl/liner feeders advanced version (ccf) constant voltage, constant frequency controllers for smooth vibration, and steady feed rate regardless of supply voltage and frequency variation for Genset use. Linear vibrator feeders New Advance Version constant voltage and constant frequency controllers for smooth vibrati on and consistent feed rate regardless of supply voltage and frequency fluctuation for Genset application.

The vibratory feeder controller is intended to control the input to vibratory machinery automatically. This thermistors-based controller is built and configured to provide vibratory feeders with changeable half-wave rectified voltage. These controllers are microcontroller-based, and the vibration may be adjusted with the press of a button. When opposed to turning knobs, soft touch buttons are easier to use and more durable. The controller enables a steeples transition from 0 to maximum vibration intensity. When turned on, the vibration will begin at ZERO and progress to the present value. This is known as the gentle start function. This device is included to protect the Vibrator feeder controllers from an abrupt jerk. Please contact us for a price quote. With the quotation, all technical data and GA drawings will be provided. Please read the requirement matrix below for the information we need to quote you.